Appearance
Setting up a guest portal for a site
NewPlease do not action unless you have spoken with Kayne, Nick, or Neil.
This is a new service we are trialling
Background Information
INFO
Due to increased demand for a solution to lacking reception in several myhealth centres, a solution has been devised.
This solution adds a public wifi network, requiring users to accept a terms of service agreement before they are connected.
1
Set up a new network for the guest wifi
Open the Network menu in the Settings tab of the site's Unifi controller and click New Virtual Network.C_OeF3Wt.png)
1.1
Set the values:
- Network Name
- VLAN ID
- Host Address
- Guest Network
.BffTRJfx.png)
1.2
Click Add
2
Set up a new WiFi Speed Limit profile
2.1
Open the Profiles menu, select the Wifi Speed Limit tab, and click Create New.DZpppPcC.png)
2.2
Enter a speed cap of 10/2 mbps and click Add.CCjBPdqo.png)
3
Set up the Hotspot Portal
3.1
Open the hotspot editor .g4N5hetW.png)
3.2
In the leftmost tab of the settings, copy the below options
The Terms of Service is unchanged from the default at this stage
Use the latest version of the myhealth logo available, demo used .B7gVjjIP.png)
3.3
In the rightmost tab of the settings, copy the below options .C7x-HKKH.png)
3.4
Click Save
4
Set up the WiFi network
4.1
Click Create New in the WiFi settings menu .SkZ5JZ1Z.png)
4.2
Apply the below settings to the wifi network .CP7Ubp7A.png)
Known issues
- myhealth wifi network not working for staff
This issue is likely caused by the network being set as a guest network. If the guest portal is configured, the staff network should be set to isolated, instead of guest.BsyA1zaE.png)